Automatic Vertical Panel Saw

Automatic Vertical Panel Saw

The automatic vertical panel saw can continuously cut on boards based on the input data. This equipment is widely used in wood processing and metal fields and can replace traditional manual vertical panel saws.

Inquiry Contact

Technical parameters

Model	RM6125TZG
Length of grooving/cutting	2500mm
Height of grooving/cutting	1300mm
Grooving/cutting thickness	0-90mm
Main Saw	Φ300XΦ30X3.2X120T
Grooving saw	Φ80XΦ22X2.8X20T
Power of Main saw	3KW
Power of grooving saw	0.75KW
Rotary speed of saw spindle	6000RPM adjustable

Characteristic

The Automatic Vertical Panel Saw can automatically operate based on input data, ensuring efficiency and accuracy. Equipped with a dual blade vertical saw, it is the perfect choice for heavy-duty applications, and the vertical sliding table saw provides versatility for various materials.

The Automatic Vertical Panel Saw has a large saw blade and a small saw blade. The function of the small saw blade is to cut grooves and avoid edge breakage of the board.

The saw head of the Automatic Vertical Panel Saw is equipped with a servo motor, and the servo system can work precisely based on the data input by the operator.

You may also be concerned about

The reasons for the deviation of the abrasive belt

The normal swing amplitude and frequency of the abrasive belt have their standard range. If not adjusted properly, the abrasive belt may operate in an abnormal state, causing it to deviate.
Adjustment methods for abrasive belt deviatio

Check and adjust the swing amplitude and frequency of the abrasive belt to ensure they are within the normal range (usually the swing amplitude is 15-20mm and the swing frequency is 15-20 times per minute).
Maintenance and repair of Wide Belt Sander

1.Regularly inspect and replace worn abrasive belts and contact rollers to ensure the sanding effect and processing accuracy.
2. Conduct a thorough cleaning of the equipment, especially regularly removing wood chips and dust from the surface of the sand belt and rollers.
Flow rate adjustment of the spray gun

The power source of the spray gun is controlled by the compressed air pressure valve. The pressure value directly affects the atomization effect of the spray. The working pressure range is 0.3-0.5Mpa.
Cleaning after using the spray painting machine

Pour the cleaning agent into the feeding port of the paint spraying machine, start the paint spraying machine, and let the cleaning agent circulate in the pipeline to clean the paint and dirt inside the pipeline. This process can last for several minutes until the cleaning agent is discharged clearly.