In the roller coating machine, the roller is a key component that directly contacts the painting and the object to be coated. Its material and performance directly determine the coating quality and the service life of the equipment. Ceramic rollers are a type of high-performance roller commonly used in high-end roller coating machines.
Ceramic roller coating machine is not made of ordinary ceramics but are composite rollers formed by coating a layer of chromium oxide (Cr₂O₃) on the surface.Chromium oxide ceramics have a relatively high hardness, which can significantly enhance the hardness of the ceramic coating, making it less prone to wear during use. In addition, chromium oxide has excellent chemical stability and a longer service life.
Ceramic rollers also have excellent adhesion and transferability, which can achieve the best adhesion and transferability to the coating. This means that the ceramic roller coating machine can well "grasp" a certain amount of paint and evenly transfer it onto the object to be coated.However, the cost of ceramic rollers is very high because of their complex manufacturing process, which leads to their cost being higher than that of ordinary rubber rollers.The nature of ceramics is brittle and they are afraid of violent impacts and bumps. Once there is a crack, it cannot be repaired. Extra care is needed during installation, disassembly and cleaning.
If the paint contains high-hardness and highly corrosive solvents, ceramic rollers should be given priority. Or for manufacturers with extremely high requirements for coating thickness accuracy and consistency, ceramic rollers are the best choice.Although ceramic rollers are expensive, they have a long service life, stable coating quality and extremely low maintenance frequency, making them particularly suitable for production lines with extremely high quality requirements.Through our long-term investigation, we have found that an increasing number of customers are choosing ceramic roller coating machine.
The tools store is a device on a CNC router used for storing and automatically changing tools. It is like a "tool warehouse", automatically removing the current tool from the spindle according to the instructions of the processing program and installing the tools required for the next process.
The 3D scanning spray painting machine, by integrating 3D vision scanning, intelligent path planning and precise spraying, is suitable for door panels with complex shape, significantly enhancing the automation level and quality of door panel spraying.
The greatest advantage of the CNC vertical panel saw lies in its ability to fix large sheets of board almost vertically on a sturdy frame. The saw blade rotates at high speed and moves horizontally to complete the cutting of the upright board.
The Veneer Wide Belt Sander is a device designed for large-scale, high-efficiency, and high-precision surface treatment of veneer. It can sand veneer as thin as 0.1mm.
The stability of the CNC Bean Saw is the key to ensuring its long-term efficient and precise operation. Use materials with sufficient strength and rigidity, and ensure the stability of the foundation through reasonable welding and reinforcement processes.
PUR Laminating Line is used to attach PVC, PP, PET film, decorative paper, thin wood veneer and other materials onto flat base material.The entire line is fully automated and connected, with a fast production rhythm and huge production capacity, which greatly reduces labor costs and labor intensity.
A multi-rip saw is a machine that can cut wood into multiple pre-adjusted widths at one time and is a highly efficient machine.The safety of the equipment is the most crucial aspect. This type of equipment combines high speed, high power and sharp cutting tools. Any negligence may cause serious accidents.
The Vacuum Membrane Press is a device that uses an electric heating and vacuum pumping system to adsorb thermoplastic sheets or wood veneers onto workpieces. This machine is mainly composed of a heating system and a vacuum pump.
The Edge Bander is one of the core equipment in the panel furniture production line. A fully automatic edge banding machine usually integrates the following specific functions: pre-milling, gluing, end cutting, rough trimming, fine trimming, corner trimming, edge scraping, and polishing.
The RMQ series independently developed by our company is specially designed for the Lacquered Panel Sander,The usual machine structure is R-P, which R is a rubber roller and P is a sanding pad.
No.9 LIAOYANG EAST ROAD , QINGDAO, CHINA
Copyright © 2025 by Qingdao Ruimuda Machinery Co., Ltd. All Rights Reserved
