Hinge Drilling Boring Machin

Hinge Drilling Boring Machin

The hinge drilling boring machine is used in the production of furniture hinge woodworking machinery and equipment. The hinge drilling boring machine adopts high strength double guide rail, high precision of position, precision and dust proof facilities.

Inquiry Contact

Technical parameters

Model	MZ73034
Max. drilling diameter	50mm
Max. drilling depth	0-60mm
Drilling distance between two heads	220-2200mm
Number of drill	4spindles*2heads
Spindle speed	2840r/min
Motor power	1.5kw*4
Air pressure	0.6-0.8MPA

Characteristic

The hinge drilling boring machine is used in the production of furniture hinge woodworking machinery and equipment.

The hinge drilling boring machine adopts high strength double guide rail, high precision of position, precision and dust proof facilities.

The hinge drilling boring machine is equipped with high power motors, ensuring smooth operation and also has high-precision drill bits with high accuracy and small amplitude.

You may also be concerned about

The reasons for the deviation of the abrasive belt

The normal swing amplitude and frequency of the abrasive belt have their standard range. If not adjusted properly, the abrasive belt may operate in an abnormal state, causing it to deviate.
Adjustment methods for abrasive belt deviatio

Check and adjust the swing amplitude and frequency of the abrasive belt to ensure they are within the normal range (usually the swing amplitude is 15-20mm and the swing frequency is 15-20 times per minute).
Maintenance and repair of Wide Belt Sander

1.Regularly inspect and replace worn abrasive belts and contact rollers to ensure the sanding effect and processing accuracy.
2. Conduct a thorough cleaning of the equipment, especially regularly removing wood chips and dust from the surface of the sand belt and rollers.
Flow rate adjustment of the spray gun

The power source of the spray gun is controlled by the compressed air pressure valve. The pressure value directly affects the atomization effect of the spray. The working pressure range is 0.3-0.5Mpa.
Cleaning after using the spray painting machine

Pour the cleaning agent into the feeding port of the paint spraying machine, start the paint spraying machine, and let the cleaning agent circulate in the pipeline to clean the paint and dirt inside the pipeline. This process can last for several minutes until the cleaning agent is discharged clearly.